FastTrak100 User Manual
55
Using Controller Window Clicking on the Controller tab, will reveal the Controller Window. This displays
physical information about the location of FastTrak100, data channels on the card,
and the attached drives.
Viewing Controller Card Information
By left-clicking on the FastTrak controller icon, the right pane shows the following
information categories for that array:
IRQ: Identifies interrupt request assigned to PCI slot
Bus Master Base: Shows base address in hex numbering for board’s bus
master Input/Output function
ROM Base Address: Shows base address in hex numbering for FastTrak’s
Flash ROM chip
Driver Version: Identifies which version of the Promise FastTrak100 driver
you have installed.
Hardware Type: Identifies which FastTrak product is installed.