SWITCHING THE APPLIANCE ON

1.Touch the Lock control sensor for approximately 3 seconds.

2. The appliance is switched on using the On/Off

approx

 

 

control

sensor.

1 sec.

Touch the On/Off control sensor for 1 second.

The digital displays will show .

After the On/Off control sensor has been actuated to switch on your appliance, a heat setting must be selected within approximately 10 seconds. Otherwise, the appliance will switch itself off for safety reasons.

SELECT COOKING ZONE AND HEAT SETTING

1.For selecting the cooking zone, touch the

corresponding cooking zone’s key.

2. For setting and adjusting the power level, touch the Heat setting selectors.

If more than one sensor is pressed for longer

than 8 seconds, will show in the heat setting display. To reset, touch

the On/Off control sensor.

SWITCHING THE APPLIANCE OFF

To completely switch off the appliance, use the

On/Off control sensor.

Touch the On/Off control sensor.

After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the

corresponding cooking zones in the form of an (for “hot”).

hob use _23

USE HOB

NZ642NCFCBK_EE_DG68-00463A_EN.indd 23

2012-06-25 �� 6:16:44

Page 167
Image 167
Samsung NZ642NCFCBK/EE manual Switching the Appliance on, Select Cooking Zone and Heat Setting, Switching the Appliance OFF