Chapter 2 Setting Up BBSM Hotspot
Configuring DNS Forwarding
Figure 2-31 Advanced TCP/IP Settings Window with Added TCP/IP Address
Step 8 To close the Advanced TCP/IP Settings window, click OK.
Step 9 To close the Internet Protocol (TCP/IP) Properties window, click OK.
Step 10 To close the AtNatMP Properties window, click OK.
Step 11 Close the Network and Dialup Connections window.
Configuring DNS Forwarding
This section describes how to configure DNS forwarding if you did not configure your server by using the Setup Wizard. If you used the Setup Wizard, it configured DNS forwarding automatically.
The Domain Name System (DNS) forwarding feature is enabled on BBSM Hotspot to allow DNS requests to be relayed to a remote DNS server. BBSM Hotspot is not configured as a DNS server; it acts as a DNS forwarder for its clients and its own DNS requests. These DNS requests, such as www.cisco.com, are resolved into IP addresses so the Internet routers can locate the web server with the content.
Note You must obtain the IP address for your DNS servers from your ISP before you can perform the following procedure. Refer to the BBSM Hotspot Configuration Requirements Checklist.
Cisco BBSM Hotspot 1.0 User Guide
| ||
|
