DeWalt 1 appendix Calculating TCP/IP Addresses Window

Chapter 2 Setting Up BBSM Hotspot

Running the Setup Wizard

Step 6 Click Next. The Calculating TCP/IP Addresses window appears. BBSM Hotspot uses the information provided in the Enter External and Internal IP Addresses window to calculate TCP/IP addresses for the server.

Note If you need to change the IP addresses of the NICs from the defaults generated by the Setup Wizard, you must use the Address Change Wizard to make these changes. Continue with and complete the Setup Wizard, then use the Address Change Wizard to change the NIC addresses to the desired settings. Refer to the “Running the Address Change Wizard” section on page A-1.

(See Figure 2-4and Table 2-4for field descriptions.)

Figure 2-4 Calculating TCP/IP Addresses Window

Cisco BBSM Hotspot 1.0 User Guide

78-15293-01 2-7