Residual heat indicator
When an individual cooking zone or the hob is turned off, the presence of residual heat is shown with an 
, 
(for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the 
, 
symbol will go out and information about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be avoided by always taking care when near the hob.
Temperature detection
If for any reason the temperatures on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level.
When you have finished using the hob, the cooling fan will continue to run until the hob’s electronics has cooled down. And the cooling fan switched itself off depending upon the temperature of the electronics.
Hob use
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
Cookware for induction cooking zones
The induction hob can only be turned on when cookware with a magnetic base is placed on one of the cooking zones. You can use the following suitable cookware.
Cookware material
Cookware material | Suitable |
|
|
Steel, Enamelled steel | Yes |
|
|
Cast iron | Yes |
|
|
Stainless steel | If appropriately labelled by the manufacturer |
|
|
Aluminium, Copper, Brass | No |
|
|
Glass, Ceramic, Porcelain | No |
|
|
NOTE
Cookware for induction hob is labelled as suitable by the manufacturer.
NOTE
When used on induction cooking zones, cookware may make noises. These noises are normal.
NOTE
English 15
Hob use
3/31/2016 11:53:36 AM
