3-5 Using the Product
3. Press the or button to select a particular device and press the [ ] button. It is switched to the selected device.
- <Anynet+ (HDMI-CEC)> must be set to On in the <Application> menu for the <Device List> menu to appear.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices
connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the
connected device.
If you have selected external input mode by pressing the [SOURCE] button, you cannot use the <Anynet+> function.
Make sure to switch to an <Anynet+> device by using the <Device List>.
Support