![](/images/new-backgrounds/1159532/15953221x1.webp)
Adjusting Your LCD Monitor
No. | Name | Description |
nMoves the selector right or left on the OSD.
7 | n Increases or decreases the Brightness. | ||
n | Increases or decreases the values of the selected | ||
| |||
|
| function. |
Automatic Save
Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the monitor automatically saves any adjustment you have made. These changes are saved into a user area in the monitor.
The monitor can save adjustments for up to 4 user modes. It has 13 for 210T (15 for 240T ) factory preset or preload modes, one for each signal frequency as listed in table 7 on page 25. If you have made no adjustments, the on screen display disappears and the monitor does not save anything.
Function | Description |
|
|
SOURCE | n Use this button to change a video source |
nVideo sources are changed in the following order:
| ||
| n Video: | PC: |
|
| |
PIP | n Use this button to see both PC and Video the same time with either | |
| PC or Video is in a small window superimposed on PC or Video. |
Video | Video | PC | |
| |||
PC |
|
| |
| PC | Video | |
*When PBP,
PC | Video | Video | PC |
RCA | RCA | ||
DVI | DVI |
English 9
Portuguese Italiano Español Deutsch Français English