Specifications

Note

Design and specifications are subject to change without prior notice.

Class B (Information Communication equipment for residential use)

This device is registered for EMC requirements for home use (Class B). It can be used in all areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This PDP Display has a built-in power management system called PowerSaver. This system saves by switching your PDP Display to low-power mode when it has not been used for a certain amount of time. The PDP Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your PDP Display OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

PowerSaver

State

 

Normal Opera-

Power saving

Power off

 

 

 

tion

mode

 

Power Indicator

On

Blinking

Off

Power MD230

P50HP,

The power

2 watts

0 watt

Con-

P50HP-2

consumption

 

 

sumption

 

may differ de-

 

 

(Typical)

 

pending on the

 

 

 

region. Refer

 

 

 

 

 

to the label on

 

 

 

 

 

the back of the

 

 

 

 

 

product.

 

 

 

 

P63FP,

The power

2 watts

0 watt

 

 

P63FP-2

consumption

 

 

 

 

 

may differ de-

 

 

 

 

 

pending on the

 

 

 

 

 

region. Refer

 

 

 

 

 

to the label on

 

 

 

 

 

the back of the

 

 

 

 

 

product.

 

 

Note

The actual power consumption may be different from the indicated power consumption if the system condition or settings are changed.

To stop any power consumption, disconnect the power cable on the back. Be sure to disconnect the power if you intend to stay away from home for many hours.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.

80