Adjusting the PDP Display

•For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the PDP Display turns on.

•Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. If you do unplug the cable, restart the system.

•Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop.

•To access other sources, press the SOURCE button in MagicInfo.

•The preset password for the PDP Display is "000000".

•The server program's Power-On option works only if the PDP Display's power is com- pletely shut off.

Please make sure not to use the Power-On option when the PDP Display is in the process of shutting down since this may cause system errors on the PDP Display.

•When using MagicInfo with the MagicInfo Server Program: perform Network mode.

•When using MagicInfo with the device directly connected to PDP Display : execute Device mode.

•Press ESC to directly go to the MagicInfo Window screen.

•To setup MagicInfo on a Windows screen, a keyboard and mouse are required.

•To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation.

•For pivoted PDP Displays, ticker transparency is not supported.

•For pivoted PDP Displays, a screen resolution of up to 720*480(SD) is supported for movies.

•For drive D:, EWF is not applied.

•To save Setup contents that have been changed when EWF is in the Enable state, you must Commit them.

•By selecting Disable, Enable or Commit, the system is restarted.

MagicInfo

1. Select Application - step 1

68