Adjusting the PDP Display
•
Component
Note
•MagicInfo can only be enabled when a network box is connected.
•The HDMI port and network box cannot be connected at the same time.
Multi Control 
Assigns an individual ID to the SET.
MENU → 
→
→
→ 
→ ENTER → 
→ ENTER → 
, 
→ [0~9]
•ID Setup
Assigns distinctive IDs to the SET.
•ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
•
PC / DVI / BNC
•
AV
•
HDMI
•
MagicInfo
•
Component
Note
•MagicInfo can only be enabled when a network box is connected.
•The HDMI port and network box cannot be connected at the same time.
Note
•The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully.
67