Introduction

Your PDP Display

Note

The PDP device may interfere with an amateur radio or AM radio.

Front

SOURCE button [SOURCE]

Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the PDP Display at the time.

[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [BNC] → [Component]

Note

•MagicInfo can only be enabled when a network box is connected.

•The HDMI port and network box cannot be connected at the same time.

Enter button []

Activates a highlighted menu item.

MENU button [MENU]

Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.

- VOL+

Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, push the button to adjust volume.

SEL

Moves from one menu item to another vertically or adjusts selected menu values.

Power button []

Use this button for turning the PDP Display on and off.

Power indicator

Shows PowerSaver mode by blinking green

11