South OnChip PCI Device
Onboard Device | Select Menu | |
Onboard AC97 Audio | [Auto] | Item Specific Help |
| ||
Onboard Chip SATA | [IDE Controller] |
|
Onboard AC97 Audio [Auto]
Setting to [Auto] allows the BIOS to detect whether you are using any audio device. If an audio device is detected, the onboard audio controller is enabled. If no audio device is detected, the controller is disabled. If there are conflicts with the onboard audio controller, set the appropriate field to [Disabled]. Configuration options: [Auto] [Disabled]
Onboard Chip SATA [IDE Controller]
Allows you to enable or disable the Onboard Chip SATA. Configuration options: [SATA Disabled] [IDE Controller]
Primary Display Adapter [PCI]
Allows you to set the graphics controller to use as the primary boot device. Configuration option: [PCI]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the option ROM on the onboard LAN chipset. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to set the addresses for the onboard serial port connector. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Parallel Port Address [378/IRQ7]
Allows you to set the base address of the onboard parallel port connector. If you disable this field, the Parallel Port Mode and ECP Mode Use DMA items are not
Parallel Port Mode [ECP+EPP]
Allows you to set the operation mode of the parallel port.
Configuration options: [SPP] [EPP] [ECP] [ECP+EPP]
ECP Mode Use DMA [3]
Allows you to select the ECP Mode. This item becomes configurable only if the Parallel Port Mode is set to [ECP] or [ECP+EPP].
Configuration options: [1] [3]
ASUS Pundit |