5.6.5 Boot Settings Configuration

Boot Settings COnfiguration

Quick Boot

[Enabled]

Boot Num-Lock

[On]

Typematic Rate Setting

[Disabled]

x Typematic Rate (Chars/Sec) 6

x Typematic Delay (Msec)

250

Full Screen LOGO

[Enabled]

Halt On

[All,But Keyboard]

Select Menu

Item Specific Help

Allows the system to skip certain tests while booting. This will decrease the time needed to boot the system.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Enabled] [Disabled]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [On] [Off]

Typematic Rate Setting [Disabled]

Allows you to enable or disable the keyboard typematic rate setting. Set to [Enabled] to configure the Type Rate and Type Delay items. Configuration options: [Disabled] [Enabled]

The items Typematic Rate (Chars/Sec) and Typematic Delay become configurable only when the item Typematic Setting is set to [Enabled].

Typematic Rate (Chars/Sec) [6]

Allows you to select the rate at which character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]

Typematic Delay (Msec) [250]

Allows you to set the delay before key strokes begin to repeat. Configuration options: [250] [500] [750] [1000]

5-26

Chapter 5: BIOS setup