Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢It may take a while for the picture to appear.
Viewing the Displays and Menus
Viewing the Display
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain picture and sound settings.
TV #1 |
| 1080i | 16:9 | English |
| ||||
DTV Air Dolby Digital | Fri, Dec 19 2:05 am | 1:55 am - 2:55 am | ||
M. Spillane’s Mike Hammer |
|
|
| |
Bonocrunch |
|
|
| |
|
|
|
|
|
Next Program | Prison Break |
| 2:55 am - 3:55 m | |
| ||||
|
|
|
|
|
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels
are memorized, use the CH 
or CH 
button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel Lists).
Storing Channels in Memory
(Automatic Method)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Channel | Antenna | : Air | |
Auto Program | ► | ||
|
Clear Scrambled Channel
Channel List
Fine Tune
Viewing the Menus
With the power on, press the MENU button.
The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application, Support.
Picture | Mode | : Standard |
| ||
| Cell Light | : 4 |
| Contrast | : 95 |
| Brightness | : 45 |
| Sharpness | : 50 |
| Color | : 50 |
| Tint (G/R) | : G50/R50 |
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
Press the EXIT button to exit.
➢ It takes about one minute until the
menu disappears.
Press the ▲ or ▼ button to select Auto Program, then press the ENTER button.
Auto Program
Select the Antenna source to memorize.
Air |
| Start |
Cable |
| Start |
Auto |
| Start |
|
|
|
Move | Enter | Return |
|
|
|
Press the ▲ or ▼ button to select an antenna connection, then press the ENTER button.
➢Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
Auto Program
Select the cable system.
Analog | STD | HRC | IRC |
Digital | STD | HRC | IRC |
|
| Start |
|
|
|
|
|
| Move | Enter | Return |
|
|
|
|
English -
