Troubleshooting for Anynet+
Symptom | Solution |
Anynet+ does not work. | • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices |
| only. |
| • Connect only one receiver (home theater). |
| • Check if the Anynet+ device power cord is properly connected. |
| • Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. |
| • Check whether Anynet+ |
| • Check whether the TV remote control is in TV mode. |
| • Check whether it is Anynet+ exclusive remote control. |
| • Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media play, |
| Plug & Play, etc.) |
| • When connecting or removing the HDMI 1.3 cable, please make sure to search devices |
| again or turn your TV off and on again. |
| • Check if the Anynet+ Function of Anynet+ device is set on. |
I want to start Anynet+. | • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ |
| |
| • Press the TV button on the TV remote control to switch to TV. Then press the TOOLS |
| button to show the Anynet+ menu and select a menu you want. |
I want to exit Anynet+. | • Select View TV in the Anynet+ menu. |
| • Press the SOURCE button on the TV remote control and select a device other than |
| Anynet+ devices. |
| • Press CH, CH LIST, |
| (Note that the channel button operates only when a |
| connected.) |
The message Connecting to | • You cannot use the remote control when you are configuring Anynet+ or switching to a view |
Anynet+ device... appears on the | mode. |
screen. | • Use the remote control when the Anynet+ setting or switching to view mode is complete. |
The Anynet+ device does not play. | You cannot use the play function when Plug & Play is in progress. |
The connected device is not | • Check whether or not the device supports Anynet+ functions. |
displayed. | • Check whether or not the HDMI 1.3 cable is properly connected. |
| • Check whether Anynet+ |
| • Search Anynet+ devices again. |
| • You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables |
| may not support Anynet+ functions. |
| • If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power |
| cord or a power failure, please repeat the device scan. |
The TV program cannot be | Check whether the antenna jack on the recording device is properly connected. |
recorded. |
|
The TV sound is not output | Connect the optical cable between TV and the receiver. |
through the receiver. |
|
English - 46
