English - 62
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER
E
button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the
NMedia Play (USB & DLNA) feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
N
If there is a power interruption to the TV when the NReceiver is set to On (by disconnecting the power cord or a power failure), the
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 31)
Troubleshooting for Anynet+
Symptom Solution
Anynet+ does not work. Check if the device is an •Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theater). •
Check if the •Anynet+ device power cord is properly connected.
Check the •Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether • Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode. •
Check whether it is •Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media Play (USB •
& DLNA), Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again •
or turn your TV off and on again.
Check if the •Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.Check if the Anynet •+ device is properly connected to the TV and check if the Anynet+
(HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the •TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet+ menu and select a menu you want.
I want to exit Anynet+.Select •View TV in the Anynet+ menu.
Press the •SOURCE button on the TV remote control and select a device other than Anynet+
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
The message Connecting to
Anynet+ device...
appears on the screen.
You cannot use the remote control when you are conguring Anynet+ or switching to a view •
mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete. •
The Anynet+ device does not
play.
You cannot use the play function when •Plug & Play is in progress.
The connected device is not
displayed.
Check whether or not the device supports •Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected. •
Check whether •Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search •Anynet+ devices again.
You can connect an •Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may
not support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power •
cord or a power failure, please repeat the device scan.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected. •
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver. •
U
Move
E
Enter
R
Return
View TV
Device List
Recording : DVDR
DVDR MENU
DVDR INFO
Receiver : On
Setup
BN68-850_Eng.indb 62 2009-06-18 �� 3:55:59