Samsung PS-42D4S Input Mode PC/DVI, Video Signal Dot x Line Vertical Horizontal, NVidia chipset

Input Mode (PC/DVI)

ENG

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Video Signal	Dot x Line	Vertical	Horizontal	Vertical	Horizontal
		frequency (Hz)	frequency (kHz)	polarity	polarity
	640 x 350	70.086	31.469	N	P
		85.080	37.861	N	P
	640 x 400	85.080	37.861	P	N
	720 x 400	70.087	31.469	P	N
		85.039	37.927	P	N
	640 x 480	59.940	31.469	N	N
		72.809	37.861	N	N
		75.000	37.500	N	N
IBM PC / AT		85.008	43.269	N	N
Compatible	800 x 600	56.250	35.156	N/P	N/P
		60.317	37.879	P	P
		72.188	48.077	P	P
		75.000	46.875	P	P
		85.061	53.674	P	P
	848 x 480	60.000	29.838	nVidia chipset
		72.000	36.072
		75.000	37.650
	1024 x 768	60.004	48.363	N	N
		70.069	56.476	N	N
		75.029	60.023	P	P
		84.997	68.677	P	P

(N: Negative / P: Positive)

◆The interlace mode is not supported.

◆The television might operate abnormally if a non-standard video format is selected.

Notes

◆The PC text quality for PS-42D4Sis optimum in VGA mode (848 x 480@60Hz).

◆When this television is used as a PC display, 24-bit colour is supported (over 16 million colours).

◆Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a television.

◆If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).

In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the TV/VIDEO button to enter the Video mode. Also, make sure that the PC is connected.

◆When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the television (Otherwise, random signals might appear).

◆When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections.

◆The Display Settings Table above complies to the IBM/VESA standards, and based on the analog input.

◆The DVI support mode is regarded as same to the PC support mode.

◆The best timing for the vertical frequency to each mode is 60Hz.

58