Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you:

Purchase the PDP

Find that the remote control is no longer operating correctly

1 Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

- on the battery against - on the remote control

+ on the battery against + on the remote control

3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Assembling the Stand-Base

1Assemble two support pins with the stand base and firmly secure

both sides of the support pins using 8 screws provided.

2Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided.

Two or more people should carry the PDP. Never lay the PDP on the floor because of possible damage to the screen. Always store the PDP upright.

9

Page 9
Image 9
Samsung PS-42D4S manual Inserting the Batteries in the Remote Control, Assembling the Stand-Base