Introduction

Remote Control Battery Installation

1

Press firmly and slide

2

Install new battery into the

3

Put the cover

the battery cover off.

compartment.

back.

CR20253VOL

T

S

Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with a “+” is facing up.

3VOL

T

S

To ensure safe operation, please observe the following precautions :

Use CR2025 type battery.

Avoid contact with water or liquid.

Do not expose the remote control to moisture or heat.

Do not drop the remote control.

If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.

Risk of an explosion if battery is replaced by an incorrect type.

Dispose of used battery according to the instructions.

Remote Control Operating Range

Point the remote control toward the projector (In- frared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 23.0’ (7m) and 30° in front of the projector.

23.0’ (7m)

Approx.15°

11

English

English

Page 12
Image 12
Sanyo PDG-DSU30 owner manual Remote Control Battery Installation, Remote Control Operating Range