Sanyo PDG-DSU30 owner manual Powering On/Off the Projector, Powering On the Projector

Installation

Powering On/Off the Projector

Powering On the Projector

1.Ensure that the power cable and signal cable are securely connected. The POWER LED will turn red.

2.Remove the lens cap. 

3.Turn on the lamp by pressing “ON/STAND-BY” on the control panel or the remote control.  The POWER LED will flash blue.

The startup screen will display in approximately 5 seconds.

When disappear startup screen, the POWER LED will turn blue.

4.Turn on your source (computer, notebook, video player, etc.) The projector will detect your source automatically.

If you connect multiple sources at the same time, use the

“INPUT” on the remote control or use “COMPUTER”, “S- VIDEO”, “VIDEO” on the remote control to switch inputs.

2 ON/STAND-BY

OR

Note

Turn on the projector first and then the signal sources.

Lens Cap

1

14

English