Sanyo PDG-DSU30 owner manual Problem LED lighting message, Power-Led

Appendices

not turn on until the lamp module has been replaced. To replace

the lamp, follow the procedures in the “Replacing the Lamp”.

Problem: LED lighting message

Message		POWER-LED
	(Blue)		(Red)
Standby (Input power cable)
Normal (Power on)
Powering up (Warming up)	Flashing(1 sec)
Power off (Cooling-I: It can’t ac-	Flashing(0.5 sec)
cept any key at this status)
Power off (Cooling-II: It can
accept power key to turn on the	Flashing(1 sec)
projector)

Error (Lamp failed)

Error (Fan lock)

Error (Over temp.)

Flashing(0.5 sec)

Flashing(1 sec)

Flashing

(0.5 sec on, 2 secs off)

Note

Steady light =>

No light =>

36

English