Samsung PS-50P4H manual How to Assemble the SpeakersWall Mount

How to Install Speakers (continued)

ENG

Parts

The actual product may differ slightly from the illustration.

Speakers

2 EA

Middle Cabinet

(Wall Mount Only)

1 EA

Speaker Dust Cover

1 EA

Speaker Cable

How to Assemble the Speakers(Wall Mount)

①Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center).

②Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’s bottom rear then push the Speaker Guide Bracket towards the center (as the arrow illustrates).

Secure the Speaker Guide Bracket with provided screws @. Secure the Middle Cabinet to the center of the PDP with a screw

!. (Always use the proper screws, as indicated.)

Screw!

Screw@

③Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers.

④Connect the speakers to the PDP using the speaker cable. The connection terminals are on the rear side of both the PDP and the speakers.

(Match the color coded terminals and cables.)

Screws

Screw① Screw➁

: 2EA : 6EA

WARNING

BLACK RED

BLACK RED

1.When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage. (Damage may occur to the speaker connecting brackets or the speakers.)

2.Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.

61