Plug & Play Feature
ENG
Plug & Play
Press ENTER to Start Plug & Play
Start
Enter 
Exit
Language
Move 
Enter
Plug & Play
Antenna Input Check
Enter
Country
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
▼ More
Move 
Enter
Auto Store
Press ENTER to start channel memory 40 MHz 
0%
Start
Enter | Stop |
Auto Store
Channel store in process.
| 57 MHz | |
|
| 1% |
| Stop |
|
| Enter | Stop |
| Clock |
|
Hour | Min |
|
01 | 00 |
|
When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available.
1If the television is in Standby mode, press the POWER ( 
) button on the remote control.
Result: The message Plug & Play is displayed, and then the Language menu is automatically displayed a few seconds later.
2Select the appropriate language by pressing the † or … button.
3Press the ENTER ( 
) button to confirm your choice.
Result: The message Antenna input check is displayed.
4Make sure that the antenna is connected to the TV, and then press the ENTER ( 
) button.
Result: The Country menu is displayed.
5Select your country by pressing the † or … button.
6Press the ENTER ( 
) button to confirm your choice. Result: The Auto Store menu is displayed.
7To start the search, press the ENTER ( 
) button.
Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed.
➢To stop the search before it has finished or return to normal viewing, press the MENU ( 
) button.
➢Press the ENTER ( 
) button to set the clock.
8Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the † or … button.
9When it has finished, the message Enjoy Your Watching is displayed, and then the channel which has been stored will be activated.
Adjust 
Move
Stop
Enjoy Your Watching
16
