Samsung PS-58P96FD Setting Up Your Remote Control, Setting Up the Remote to Operate Your VCR

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.

➢TheBoxes.remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top

Setting Up the Remote to Operate Your VCR
1	Turn off your VCR.
2	Press the VCR button on your TV’s remote control.
3	Press the SET button on your TV’s remote control.
4	Using the number buttons on your remote control, enter three digits
	of the VCR code listed on page 55 of this manual for your brand of
	VCR. Make sure you enter three digits of the code, even if the first
5	digit is a “0”. (If more than one code is listed, try the first one.)
	Press the POWER button on the remote control. Your VCR should
	turn on if your remote is set up correctly.
	If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
	but try one of the other codes listed for your brand of VCR. If no
	other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in VCR mode, the volume buttons still
control your TV’s volume.

Setting Up the Remote to Operate Your Cable Box
1	Turn off your cable box.
2	Press the CABLE button on your TV’s remote control.
3	Press the SET button on your TV’s remote control.
4	Using the number buttons on your remote control, enter three digits
	of the cable box code listed on page 56 of this manual for your
	brand of cable box.
	Make sure you enter three digits of the code, even if the first digit is
	a “0”. (If more than one code is listed, try the first one.)

5Press the POWER button on the remote control.

Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046.

Note on Using Remote Control Modes: Cable Box When your remote control is in CABLE mode, the volume buttons still control your TV’s volume.

Continued...

English - 53