Setting up your French Door Refrigerator
Operating your SAMSUNG Refrigerator
Connect the water line to the fridge
• Connect the plastic line on the back of your fridge to the |
cartridge holder outlet (fully insert the plastic line to the cartridge |
Cartridge Holder
PARTS AND FEATURES
| holder outlet). | |
• | Insert plastic clip to the cartridge holder inlet and outlet. | |
• | Turn water on and check for any leakage. | |
| • | You can purchase the necessary filter cartridge at the retailer |
|
| where you purchased this refrigerator. Make sure you buy the |
|
| SAMSUNG filter cartridge (Replacement cartridge No : DA29- |
|
| 00015A) to ensure the best performance. |
| • | The water line must be connected to drinkable water only |
Clip
Filter cartridge
Plastic line (Provided)
Use this page to become more familiar with the parts and features of the Refrigerator.
Fridge Light
o 02perating
•A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line(Icemaker supply line)
To use without the water filter
Connecting to the water supply line | 1. | Cold Water line | |
• | Shut off the main water supply line and turn the Ice maker to the | 2. | Pipe Clamp. |
3. | Plastic line | ||
| off position. | 4. | Compression Nut |
• | Locate the nearest cold water drinking line. | 5. | Compression Sleeve |
6. | Packing Nut. | ||
|
| 7. | Shut Off Valve |
Connect the water line to the fridge
1) Slip the compression nut through the plastic tubing. | Household water line |
2) After inserting the compression nut into plastic tubing, | Copper tubing or Plastic tubing |
(Not supplied) (Not supplied) |
tighten the compression nut onto 1/4” compression
fitting(Provided). | Compression Nut |
(1/4”) (Purchased) |
| Do not overtighten the compression nut. |
| Bulb |
| Ferrule |
| |
• | Using Copper Tubing | (Purchased) |
|
Plastic Tubing | Compression | ||
| - Slip the compression nut and ferrule on copper tubing | fitting (Provided) | |
| (Provided) | ||
| as shown. |
| Compression Nut |
• | Using Plastic Tubing |
| (1/4”) (Provided) |
Refrigerator |
| ||
|
|
|
-Insert the molded end(Bulb) of the plastic tubing into the compression fitting.
CAUTION Do not use without the molded end(Bulb) of the plastic tubing.
3)Tighten the compression nut onto the compression fitting.
4)Turn water on and check for any leakage.
•Water line must be connected to drinkable water only.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line
(Icemaker supply line).
Door Bin
Glass Shelf
Vegetable & Fruit Drawer
Pull Out Drawer
Freezer Drawer Bin
Moving Tray (Location is adjustable)
Door Bin
Bottle Bin
Freezer Light
18_ setting up | Operating _19 |
