Setting up your French Door Refrigerator
2.Disconnect two connectors ( 3 ) at each side of the top cap and the one connector( 4 ) on left side door . Remove the tube( 5 ) in the door side with
pressing the red part( 6 ) of water line coupling.
| Blue Clip |
|
| (5/16”) | 3 |
|
| |
Red Clip |
| 4 |
(1/4”) |
|
|
3
| 5 |
If a red clip and blue clip are on the coupling, two | 6 |
CAUTION clips must be removed before removing the tube.
3.Remove the three hex head bolts( 7 ) attached to the upper left and right door hinges with a Wrench(10mm).
With a Philips head screwdriver, remove the ground
screw( 8 ) attached to the upper left and right door hinges.
Remove the upper left and right door hinges( 9 ).
8
7
9
4. Lift the door straight up to remove.
5.With a Philips head screwdriver, remove the two
screws( 10 ) attached to the lower left and right door hinges.
With an Allen Wrench(3/16”), remove the two hex
head bolts( 11 ) attached to the lower left and right door hinges.
Remove the lower left and right door hinges( 12 ).
12
10
11
10_ setting up
