ReattaChing the RefRigeRatoR dooRs
4.Connect the water line ( 5 ) and then insert two clips on the coupling with pulling tube. Connect the one connector( 4 ) on left side
door and two connectors ( 3 ) at each side of the top cap.
Two clips are enveloped inside of the top cap
5Cabinet
Tube
Dispenser
Door Tube
3
4
3
Blue Clip
(5/16”)
Red Clip
(1/4”)
PU 01ESTTING
5.Position the Top Table( 2 ) in place.
With a Philips head screwdriver, insert and tighten the 3 screws into the Top Table. With the door opened, reinsert the Top Table cap( 1 ) and close the doors.
When reattaching the top table, make sure that the wires are not pressed or damaged by the top table.
2
1
Setting Up _13