Emerson MVME55006E manual Connector Pin Assignments, Connectors

Connector Pin Assignments

5

5.1Introduction

This chapter provides pin assignments for various headers and connectors on the MMVE5500 single-board computer.

zAsynchronous Serial Port Connector (J1) on page 68

zEthernet Connectors (J2) on page 68

zIPMC Connector (J3) on page 69

zPCI/PMC Expansion Connector (J4) on page 70

zCPU COP Connector (J5) on page 72

zPMC 1 Interface Connectors (J11, J12, J13, J14) on page 73

zBoundary Scan Connector (J18) on page 77

zPMC 2 Interface Connectors (J21, J22, J23, J24) on page 77

zAsynchronous Serial Port (COM2) Planar Connector (J33) on page 81

zVMEbus Connectors (P1 & P2) (PMC Mode) on page 82

zVMEbus Connectors (P1 & P2) (SBC Mode) on page 83

zMemory Expansion Connector (P4) on page 86

The following headers are described in this chapter:

zEthernet 2, PMC/SBC Mode, and P2 I/O Selection Headers (J6, J7, J28, J32, J34, J97 – J110) on page 88

zFlash Boot Bank Select Header (J8) on page 95

zVME SCON Select Header (J27) on page 95

5.2Connectors

This section discusses the various connectors on the MVME5500.

MVME55006E Single-Board Computer Installation and Use (6806800A37D) 67