Emerson MVME55006E manual 1.1 CR/CSR Settings

MOTLoad Firmware Default VME Settings

4.5.1.1CR/CSR Settings

The firmware supports both Auto Slot ID and Geographical Addressing for assigning the CR/CSR base address dependent on a hardware jumper setting. See the VME64 Specification and the VME64 Extensions for details. As a result, a 512K byte CR/CSR area can be accessed from the VMEbus using the CR/CSR AM code.

4.5.1.2Displaying VME Settings

To display the changeable VME setting, type the following at the firmware prompt:

zvmeCfg -s -m

Displays Master Enable state

zvmeCfg -s -i(0 - 7)

Displays selected Inbound Window state

zvmeCfg -s -o(0 - 7)

Displays selected Outbound Window state

zvmeCfg -s -r184

Displays PCI Miscellaneous Register state

zvmeCfg -s -r188

Displays Special PCI Target Image Register state

zvmeCfg -s -r400

Displays Master Control Register state

zvmeCfg -s -r404

Displays Miscellaneous Control Register state

zvmeCfg -s -r40C

Displays User AM Codes Register state

zvmeCfg -s -rF70

Displays VMEbus Register Access Image Control Register state

4.5.1.3Editing VME Settings

To edit the changeable VME setting, type the following at the firmware prompt:

zvmeCfg -e -m

Edits Master Enable state

zvmeCfg -e -i(0 - 7)

Edits selected Inbound Window state

zvmeCfg -e -o(0 - 7)

Edits selected Outbound Window state

zvmeCfg -e -r184

Edits PCI Miscellaneous Register state

zvmeCfg -e -r188

Edits Special PCI Target Image Register state

zvmeCfg -e -r400

64 MVME55006E Single-Board Computer Installation and Use (6806800A37D)