Emerson MVME55006E manual Overview of Startup Procedures, Unpacking Guidelines, Startup Overview

Hardware Preparation and Installation Overview of Startup Procedures

1.4Overview of Startup Procedures

The following table lists the things you will need to do before you can use this board and tells where to find the information you need to perform each step. Be sure to read this entire chapter, including all Caution and Warning notes, before you begin.

Table 1-1 Startup Overview

What you need to do...	Refer to...
Unpack the hardware.	Unpacking Guidelines on page 16
Configure the hardware by setting	Configuring the Board on page 18
jumpers on the board.
Install the MVME5500 board in a chassis.	Procedure on page 33
Connect any other equipment you will be	Connection to Peripherals on page 34
using
Verify the hardware is installed.	Completing the Installation on page 35

1.5Unpacking Guidelines

Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items are present. Save the packing material for storing and reshipping of equipment.

If the shipping carton is damaged upon receipt, request that the carrier’s agent be present during the unpacking and inspection of the equipment.

Product Damage

Avoid touching areas of integrated circuitry; static discharge can damage circuits. Inserting or removing modules with power applied may result in damage to module components.

16 MVME55006E Single-Board Computer Installation and Use (6806800A37D)