( 9 ) Ice Off
If you don’t want to make more ice, touch the Ice Off button.
The icon will light up and the
We recommend you stop ice making if the following occur:
-There is enough ice in the ice bucket.
-You want to save water and energy.
-Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water Line is not connected, there will be a water valve noise from the back of the unit, press the Ice Off (Hold 3sec for child lock) button for less than 3 seconds until the Ice Off Indicator (
) illuminates.
CHANGING THE WATER FILTER
To reduce risk of water damage to your WARNING property DO NOT use generic brands of
water filters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter. If you want to purchase any accessories, please contact with Samsung service center.
The Filter light turns red to let you know when it is time to change your water filter cartridge.
To give you time to get a new filter, |
|
the red light comes on just before the | (Red) |
If you do not press any button(letters not ICON), the display turns off in a few seconds.
If you press any button(letters not ICON), the display lights up again.
The function key will operate after you remove your finger from the letters except E.Saver, Ice and Water key.
( 10 ) Filter Water filter usage
This icon will light up when you need to change the filter. After you use about
300 gallons of water, the filter indicator lights up. (about 6 months).
The icon will blink red for several seconds when you open or close the door.
After you install the new water filter, reset the filter indicator by touching the Alarm/ hold 3 sec for Filter Reset button.
•If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
14_ operating
capacity of the current filter runs out.
Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.
1.Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn,
2.Pull the water filter ( 1 ) from the case filter ( 2 ).
2
1
• To change the water filter more easily, shut off the water supply valve.
•Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.
•When you pull the
water filter, a little | 2 | |
water can leak from | ||
| ||
the opening. This is | 3 | |
normal. To minimize |
| |
the water leaks, keep |
| |
the filter cartridge horizontal | when you pull it. |
•To prevent overflow, empty the water filter tray ( 3 ) and dry around the filter case ( 2 ).
3.Insert the new filter into the filter case ( 4 ).
4.Push the filter, and then turn it clockwise until it locks.
•If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.
•The locked symbol should be lined up with the indicator line.
2015. 5. 7. |
��
3:51
