Disassemble the refrigerator doors
1.With the door opened, remove the cap top table ( 1 ) with a
2
1
2.Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part
( 6 ) of the water line coupler.
4
3
5
6
3.Pull and remove the hinge lever ( 7 ). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver
(+). Remove the upper left and right door hinges ( 9 ).
7 
8
9
4. Lift the door straight up to remove.
5. Remove the screw ( 10 ) attached to the |
| |
lower left and right door hinges with a philips |
| |
screwdriver (+). Remove the 2 hex head bolts |
| |
( 11 ) attached to the lower left and right door |
| |
hinges with an allen wrench (3/16”). Remove | up | |
the lower left and right door hinges ( 12 ). | ||
| ||
12 |
| |
10 |
| |
11 | 01setting | |
Allen wrench | ||
|
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved the fridge to its final location, assemble parts in reverse order.
DISASSEMBLE THE FREEZER DRAWER
1.Take out the upper drawer by lifting it up.
2.Remove the tilting pocket ( 1 ) by pulling
both support guards | 1 | |
( 2 ) upward at the | ||
| ||
same time. | 2 | |
3. Take out the lower |
| |
basket ( 3 ) by lifting |
| |
the basket up from the | 3 | |
rail system. |
|
4.Remove 4 hex head bolts from both sides with a socket wrench (10mm).
setting up _09
2015. 5. 7. |
��
3:51
