If ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker.

Do not press the test button continuously when

the tray is filled

with ice or

water. Water may

overflow or ice

may jam the

bucket.

• Normal Use

 

 

To fill the ice bucket to maximum capacity after installation, follow these steps:

Water may overflow or ice may jam the bucket.

1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

-- Waiting 24 hours will allow your ice maker to cool properly.

2.Dispense 4 to 6 ice cubes into the glass.

3.After 8, and then 16 hours, dispense a full glass of ice.

When you press the Test button, you will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.

The chime sounds automatically again to let you know the ice maker is working well.

If a power failure occurs, ice cubes may CAUTION melt then freeze together when the power

comes back on, causing the dispenser to be out of order.

To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water.

After you dump the ice from the ice bucket, CAUTION you should press the dispenser lever once

with the ‘ICE CUBED’ or ‘CRUSHED’ function ON.

The ice maker will make new ice faster after you return the ice bucket to the freezer.

If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page.

However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.

Using the ice off Function

 

 

 

 

PULL

PUSH

 

 

 

 

 

 

 

 

 

 

02operating

 

 

 

 

 

 

 

 

 

 

When you select the Ice Off mode, remove all ice

 

 

 

cubes from the bucket. If you are not using the ice

 

 

dispenser, the ice cubes may clump together. Pull

 

 

the lock lever forward to remove the bucket. Throw

 

 

away the ice cubes or clumped ice. Push the

 

 

bucket back until you hear a click.

 

 

 

 

 

 

Use only the ice maker provided with

 

 

 

 

CAUTION the refrigerator. The water supply to

 

 

 

 

 

this refrigerator must only be installed/

 

 

 

 

 

connected by a suitably qualified person.

 

 

 

 

 

Connect to a potable water supply only.

 

 

To operate the ice maker properly, water pressure

 

 

of 138 ~ 862 kPa is required.

 

 

 

If you have a long vacation or business trip and

 

 

won’t use the water or ice dispensers for a long

 

 

time:

 

 

 

-- Close the water valve. Otherwise, water leakage

 

 

may occur.

 

 

 

-- Remove all food.

 

 

 

-- Unplug the refrigerator.

 

 

 

-- Wipe excess moisture from inside and leave

 

 

the doors open. Otherwise, odor and mold may

 

 

develop. Do not put your fingers,

hands or any

 

 

other unsuitable objects in the chute or ice-

 

 

maker bucket.

 

 

 

-- It may result in personal injury or material

 

 

damage. Never put your finger or

any other

 

 

objects in the dispenser opening.

 

 

 

-- It may cause injury.

 

 

 

Do not try to disassemble the ice maker.

Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean it.

When you insert the Ice maker tray, be CAUTION sure that the tray is well centered at the

entrance.

Otherwise, the tray may be stuck.

operating _17

DA99-03957C-06.indb 17

2015. 5. 7.

�� 3:51

Page 17
Image 17
Samsung RFG29PEPN1/SML manual Using the ice off Function, Bucket, Any other, Entrance Otherwise, the tray may be stuck