USER INTERFACE
Setting.
Screen
-This menu displays the I.C.E. PAD user screen properties including brightness, touch point settings and power saving time settings.
[Main screen] |
How to control screen brightness
1.Choose the "Settings" icon on the main screen, and then it will change to Screen.
2.Control the screen brightness using the " " button.
-To apply your new settings, press "Apply" button( ).
How to set power saving time.
-In this mode, you can set a time for the screen to shut off after the last button press. This helps to save power.
1.Press the "Change" button ( ), and then a pop up window is displayed.
2.Choose the desired time. (After 1hr, After 30min, After 10min, After 5min, After 3min, Always on, Midnight off)
-The default setting is always on.
3.To apply your new settings, press "Apply" button ( ).
- Power saving mode : The I.C.E. PAD screen turns off, but the I.C.E. PAD remains on. NOTE - If you choose midnight off mode, the I.C.E. PAD screen turns off from 1:00 to 5:00AM.
How to calibrate the touch point
-This function can be used to calibrate the stylus pen touch point to improve usability with the Touch screen.
1. | Press the "Touchpoint" button ( | ), and then a screen will |
| appear with pointer instructions on the top. | |
2. | Hold the pen softly and press down lightly on the center of the | |
| "+"mark. Repeat as the "+" mark moves on the screen. |
| 3. To save the new calibration data, touch the LCD screen within 30 | |
[Touch point reset mode] | seconds. | |
- To keep the current setting, wait for 30 seconds. | ||
|
OPERATINGSAFETY WARNINGINSTRUCTIONSSIGNS
51