REVERSING THE DOOR SWING

- Read these instructions completely and carefully

 

• Before reversing the door, ensure first that the refrigerator is disconnect by the plug

Warning

from the mains. You should take out contents and accessories like door guard from

the doors. Be careful not to drop the doors during dissembling or assembling.

 

1.Handle parts carefully to avoid scratching the paint.

2.Lay out all the screws by their related parts to avoid using them in the wrong places.

3.Provide a non-scratching work surface for the doors. (ex:blanket)

4.During door reversing, refrigerator should not be stained with oil.

5.We recommend to use tools descrided below. (Possible to use simliar size of socket wrench & wrench)

Not provided

Additional part

Phillips Head

Flat Head

10mm

11mm

Allen Wrench

Cover Wire

Socket Wrench

Wrench

(3/16inch)

Hinge L

Driver (+)

Driver (-)

(for bolts)

(for hinge shaft)

(for Mid hinge)

(In Top Cover)

 

 

 

 

 

 

 

 

- DISASSEMBLY OF THE FRIDGE DOOR

1. Disassemble the CAP CABI,

2. Disconnect electric wires

3. Remove 3 bolts on the top

after removing 2 screws.

inside of the CAP CABI.

of the refrigerator with 10mm

 

 

socket wrench. Make sure the

 

 

door is firmly closed.

CAP CABI

 

 

4.Disassemble the Fridge door by lifting it upward.

Be careful not to drop and scratch the face of the Fridge door.

5.Disassemble the COVER WIRE DOOR on the top of the fridge door with a flat- head screw driver by putting it into the indicated position(∆).

COVER WIRE DOOR

6.Disjoin the COVER WIRE HINGE R from the ASSY HINGE UPP as shown. Take out the electric wire from the

COVER WIRE HINGE R.

COVER WIREHINGE R

ASSY HINGE UPP

15

DA99-01220V(EN)-0.1.indd 15

 

 

2010.1.19 9:26:44

AM