REVERSING THE DOOR SWING

7.Switch the direction of the electric wire as below. Take out the COVER WIRE HINGE L from the underneath the CAP CABI and rejoin it with the electric wire.

8.With 11mm wrench, separate the HINGE SHAFT and then flip the HINGE and reattach the HINGE SHAFT.

9-1. After rejoining the COVER WIRE HINGE L and

the ASSY HINGE UPP, Switch the position of the GROMMET HINGE and the

CAP SPACE DOOR.

9-2. When disassembling CAP

SPACE, do not Push both side hooks but bottom hook as shown.

SHAFT

 

GROMMET HINGE

10. Switch the position of the

- DISASSEMBLY OF THE

STOPPER DOOR and

FREEZER DOOR

the GROMMET HINGE as

11. Remove 2 bolts and screw

shown.

to disassemble the ASSY

 

HINGE MID.

STOPPER

GROMMET

12. Disassemble the Freezer

13. Disassemble the COVER

door by lifting it upward.

LEG FRONT by removing

Be careful not to drop and

the 2 screws.

scratch the Freezer door.

 

COVER LEG

FRONT

14.Disassemble the ASSY HINGE LOW as shown and put the AUTO GUIDE upside down, switch the position of the SHAFT.

AUTO GUIDE

ASSY HINGE

LOW

When joining, tighten

Note a screw not to make unpredicted noise.

16

DA99-01220V(EN)-0.1.indd 16

 

 

2010.1.19 9:26:47

AM