INSTALLING THE FRIDGE/FREEZER

Allow an adequate space and install the fridge/freezer on a firm, level floor.

•If the appliance is not level, there may be unusual noises and poor cooling.

•Wait for at least one hour before plugging the appliance in.

Clean the fridge/freezer.

• Wipe and clean the appliance inside and outside with a damp cloth.

Plug the fridge/freezer into a wall socket used exclusively by this appliance.

• This appliance must be properly grounded.

Place the food in the fridge/freezer.

•It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.

LEVELLING

If the front of the appliance is slightly higher than the rear, the door can be closed more easily.

The appliance tilts down to the left.

Turn the left adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

The appliance tilts down to the right.

Turn the right adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

Allow the enough space for opening drawers.

Drawers can be easily opened with this condition.

 

m

with depth opened

1050m

doors

 

 

 

 

at least

 

 

 

 

 

 

 

595mm

 

50mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

600m

 

 

 

 

 

 

 

 

 

 

 

 

at least

 

 

at least

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50mm

 

 

 

 

 

 

 

 

 

 

 

 

50mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

950mm

5

DA99-01220V(EN)-0.1.indd 5

 

 

2010.1.19 9:26:35

AM