NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
Connections To A TV Or VCR
Open the cover.
To S connector
| To AV connector |
S cable | AV cable |
(optional) | (provided) |
1 2
3
4
“Y/C”/“CVBS”Cable
Video Out SelectAdapter*
Switch
To TV or VCR
TV
VCR
VIDEO PLAYBACK EN 23
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN** D White to AUDIO L IN**
*If your VCR has a SCART connector, use the provided cable adapter.
**Not required for watching still images only.
NOTES:
● Set the video out select switch of the cable |
| |
adapter as required: |
| |
Y/C: When connecting to a TV or VCR which |
| |
accepts Y/C signals and uses an |
| |
CVBS: When connecting to a TV or VCR which |
| |
does not accept Y/C signals and uses an audio/ | PLAYBACK& | |
included in the package for details on its | ||
video cable. |
| |
● The |
| |
the YTU94146A |
| |
JVC Service Center described on the sheet |
| |
availability. Make sure to connect the end with | ||
a core filter to the camcorder. The core filter | RECORDING | |
| ||
reduces interference. |
| |
1 Make sure all units are turned off. |
| |
2 Connect the camcorder to a TV or VCR as | VIDEO | |
shown in the illustration. | ||
| ||
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
6 Start playback on the camcorder. ( pg. 22)
To choose whether or not the following displays appear on the connected TV
●Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 37, 42)
Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 37, 42)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 37, 42)
CONTINUED ON NEXT PAGE
