VIDEO PLAYBACK EN 25
Playback Using The Remote | Buttons And Functions | |||
|
|
|
| |
Control |
|
|
|
|
|
|
|
| |
The
Installing The Battery
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by pushing the lock tab.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
2
1
13 
Lock tab
A Infrared beam transmitting window
●Transmits the beam signal.
The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”. B PAUSE Button
●Pauses the tape ( pg. 26)
Up Button ( pg. 27)
C SLOW Rewind Button ( pg. 26)
& PLAYBACK
3 Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
D REW Button
● Rewind/Reverse Shuttle Search on a tape |
( pg. 22) |
● Displays previous file in a memory card |
RECORDING
When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5 m.
NOTE:
Remote sensor
( pg. 29) |
Left Button ( pg. 27)
E INSERT Button ( pg. 56) F SHIFT Button ( pg. 27)
G DISPLAY Button ( pg. 23, 52) H SLOW Forward Button ( pg. 26) I PLAY Button
● Starts Playback of a tape ( pg. 22) |
VIDEO
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
● Starts Auto Playback of images in a memory |
card ( pg. 30) |
J FF Button
●Forward/Forward Shuttle Search on a tape ( pg. 22)
●Displays next file in a memory card ( pg. 29)
Right Button ( pg. 27)
K A. DUB Button ( pg. 55)
L STOP Button
●Stops the tape ( pg. 22)
●Stops Auto Playback ( pg. 30)
Down Button ( pg. 27)
M EFFECT Button ( pg. 27)
N EFFECT ON/OFF Button ( pg. 27)
CONTINUED ON NEXT PAGE
