Leica LED5000 MCI™

The Leica LED5000 MCI™ (for "Multi Contrast

Assembly

2. Connect the CAN-bus cable provided to

Illumination") is installed using two screws. For

1. Hold the LED5000 MCI™ with one

either of the two sockets. (The flat part of

optimum accessibility, the optics carrier should

hand and tightly screw the retain-

the plug must be facing downwards.)

be removed during assembly (see Page 23.)

ing stirrups on both top holes on the drive

 

 

­housing.

 

3. Plug the other end of the cable into one of the two "CTL2" sockets on the column.

Constraints

The Leica LED5000 MCI™ cannot be used together with the objective nosepiece.

Leica M-series

User Manual

51

 

 

 

Page 51
Image 51
Leica M205 FA Leica LED5000 MCI, Hand and tightly screw the retain, Ing stirrups on both top holes on the drive ­housing