Objective

Tools used

ρρ No tools required.

Preparation

1.Remove the protective cap on the optics carrier by turning it.

Attaching the objective

Hold the objective firmly during assem- bly and disassembly so that it does not

fall onto the stage plate. This applies particu- larly to the 2x planapochromatic objective, which is very heavy. Remove all specimens from the stage plate first.

2.Screw the objective clockwise into the optics carrier.

Alternative fastening options

ρρ If using the objective nosepiece, read the instructions on Page 28.

ρρ If using the Leica FluoCombi III™, read the instructions on Page 31.

Leica M-series

User Manual

26

 

 

 

Page 26
Image 26
Leica M205 FA user manual Objective, Attaching the objective, Alternative fastening options