Leica TL RCI Color Intensity and Temperature | Leica M205 FA

Leica TL RCI™: Color Intensity and Temperature

12

1Potentiometer for controlling the CCIC™ (Constant Color Intensity Control) illumina- tion intensity

2Potentiometer for controlling the color temperature

The transmitted-light base TL RCI™ has two electronic potentiometers that control the color intensity (1) and color temperature (2).

The controller for the color temperature simul- taneously serves as an electronic shutter:

ρρ	To interrupt your work, click the potentiom-
	eter (2).
ρρ	Click again to switch on the illumination.
	The electronics returns the color tempera-
	ture to the previously configured settings.

Using a USB mouse (only TL RCI™)

The Leica USB mouse controls the CCIC™ and dimming function of the TL RCI™ base. Connect the mouse to the corresponding USB port of the base.

ρρ	The scroll wheel of the mouse is occupied
	by default with the CCIC™ control system
	and is used to control the illumination
	intensity.
ρρ	To switch the illumination on or off, briefly
	click the scroll wheel.
ρρ	To enter or exit dimming mode, click and
	hold down the scroll wheel for longer than
	2 seconds.

Leica M-series	User Manual	97

Image 97

Leica M205 FA user manual Leica TL RCI Color Intensity and Temperature, Using a USB mouse only TL RCI

Contents

Leica M165 FC Leica M205 FA General Instructions Special manuals are provided for a number of accessories Important Safety NotesSpecial manuals Important information Symbols UsedExplanatory notes Description Safety InstructionsIntended use Non-intended use Safety Instructions contd Beam paths to protect the eyes Radiation from reaching the eyesUV radiation could damage the eyes. Therefore Supply unit Lamp housingMercury lamp Contents Objective Nosepiece Iris DiaphragmDifferent Types of Objectives 137 Care, Maintenance, Contact Persons 151150 Leica M Series for Fluorescence Congratulations Limits are made to be broken Step Towards Infinity Fewer cables Reliability for your experiments Have a special request? Let us know Modular Design Everything is Relative Objectives Maximum CompatibilityTubes Eyepieces On We Go Assembly Tools used Assembling the Focusing Column for MDG BasesΡρ Hex socket screwdriver, 3 mm Assembly Assembling the Focusing Column with an Incident-light Base Motorized Focus Restricting the Travel Path Readjusting the motorized focusRestricting the bottom travel range Tighten the screw of the limit stop Ρρ Hex socket screwdriver, 4 mm Optics Carrier Ρρ No tools required TubePreparations Assembling the tube Tools used Preparation EyepiecesMagnification range Attaching the objective ObjectiveAlternative fastening options Safety Notes UV Protection Screen AssemblyUse with one objective Do not fall onto the stage plate Objective Nosepiece AssemblyRemove the transport anchor from the objective nosepiece Screw the optics carrier onto the objective nosepiece Adjustment Objective Nosepiece Adjusting ParfocalityTighten the locking screws Below using the four hexagon-head Unpacking the base Focusing drive and columnTransmitted-light Base TL ST Base is delivered with the adapter plate Screw the 5× planapochromat into the FluoCombi FluoCombi III Preparations FluoCombi III Assembly Assembling the optics carrier FluoCombi III Assembly contd Setting up the objective nosepiece FluoCombi III Adjusting the ParfocalityBe carried out once. It ensures that Under the beam path FluoCombi III Adjusting the Parfocality contd Objective is changed FluoCombi III Centering the ObjectivesEasier Centering the objective Inserting the dichroic mirror FluoCombi III Filter and UV Protection ScreenPull the dummy filter carrier out of the holder Assembling the UV protection screen Lutely necessary to remove the two transport anchors Removing the transport anchors Transmitted-light Base TL Bfdf Stage assemblyStandard delivery Standard stage TL RC / TL RCI Leica IsoPro Mechanical Stage IsoPro Manual Mechanical Stage AssemblyLeft or right operation Control assembly Leica IsoPro Manual Mechanical Stage Assembly contdMechanical stage assembly Place the mechanical stage onto the base Insert the glass plate into the mechanical stage Basics Leica IsoPro Motorized Mechanical Stage Assembly Future transport Leica IsoPro Motorized Mechanical Stage Assembly contd Mechanical stage and base Bases Mechanical stage for X-Y stage control module Ρρ The interface to the optics carrier is on the column Cables ConnectionsTerminals Feeding the cables Cables Cable Duct Alternative installation Cables Diagram Leica LED5000 MCI Ing stirrups on both top holes on the drive housingHand and tightly screw the retain Constraints Installation on the column Leica LED5000 MCI Alternative AssemblyPull the retaining stirrup out of the Leica LED5000 MCI Leica LED5000 RL General safety notes Leica EL6000 Safety NotesRights to any warranty claims Such cases, the Declaration of Conformity shall be invalid Use the instrument in rooms with explosion hazard Leica EL6000 Safety Notes contd Electrical safety Instructions for lamp replacement Setting up the instrumentLeica EL6000 Preparations Inserting the lamp Leica EL6000 Preparation contd Leica EL6000 Connection to the Fluorescence Lamp Housing Leica EL6000 Preparation contd Replacing the lamp Leica EL6000 Replacing the Lamp Leica M-series Quick Start Guide Fastest Route to Success Overview of an M Series Microscope Correct Interpupillary Distance Adjusting the interpupillary distanceReference value Look into the eyepieces Dioptric correction Using the EyepiecesIf you do not wear glasses If you wear glasses Focusing FocusingCoarse/fine adjustment Adjusting the resistance Adjusting the Resistance of the Focus DriveFocusing Zooming Changing Magnification ZoomLook into the eyepieces Focus on the specimen Enabling and disabling ratchet steps Ratchet Steps and Magnification LevelsMagnifications and fields of view Requirements for parfocal work Parfocality More Comfort and Convenience for Your WorkParfocality Enlarge the view to the maximum level Focus on the specimen Closing the iris diaphragm Iris DiaphragmOpening the Iris Diaphragm Eyepieces Following eyepieces are available for the M series Magnification Factors of the Eyepieces Potential sources of infection Health Notes Dioptric Correction Using the Dioptric Correction Dioptric Correction and Parfocality Adjusting Use GraticulesUse with the Leica AX carrier Convergence angle in the stereoscopic image Photography & Video Adapter Photography & VideoLeica DFC cameras Leica Application Suite Photo Tubes and C-mounts Photo beam path Trinocular Video/Phototube 50% Trinocular Video/Phototube 100% Switchover Microscope Carrier Parfocal work Objective NosepieceObjective change Technical constraints Objectives Optical Accessories Achromatic objectives Different Types of ObjectivesPlanachromatic objective 1× Achromatic objectives with a long focal length Bases Leica TL ST Transmitted-light Base Controls Light intensity control Leica TL ST Transmitted-light Base OperationTransmitted-light control Bright field Leica TL ST Transmitted-light Base Changing Bulbs Precautionary measuresChanging the halogen lamp Leica TL Bfdf Transmitted-light Base Controls Adapter at the focusing drive Manufacturers of the light guide and cold light source Leica TL Bfdf Transmitted-light Base OperationDark field Leica TL RC / TL RCI Controls Inverted world? Leica TL RCI The Deflection MirrorTilted mirror Functions of the rotary knob Using a USB mouse only TL RCI Leica TL RCI Color Intensity and Temperature Leica TL RC / TL RCI Operation Setting the relief contrast Vertical bright-field illumination Leica TL RCI Methods in Transmitted LightSingle-sided dark field Suitable for fixed specimens and fine struc- tures Starting position Leica TL RCI Relief ImagesPositive relief contrast Negative relief contrast Dynamic relief contrast Leica TL RCI Relief Images contdSuitable for semitransparent and transparent specimens Filters for Leica TL RC and TL RCI Using FiltersDaylight filter for Leica TL ST Operating the Leica IsoPro mechanical stage Leica IsoPro Non-motorized Controls IsoPro Leica IsoPro Motorized ControlsStage DCI module System Illumination If the optics carriers are accidentally Use Contact with the baseBottom end of the guide rods Back into the original position Ρρ Use the key to switch the illumination on or off Using the keyboardLeica LED5000 MCI contd Illumination scenarios Constraint Leica EL6000 About the Instrument Special featuresHeat-absorbing filter Compatible light guides Leica EL6000 About the Instrument contdIdentification of the instrument Leica EL 6000 Operation Intensity switchControls Running-time meter Fault description Possible faults Remedy Leica EL 6000 TroubleshootingOpen shutter or rotate intensity switch Type only see Spare parts and accessories Cleaning and MaintenanceReplacing the instrument fuse Repairs Fluorescence Simple filter holders also protect the system from dust Filter ChangerFilter sets for fluorescence FIM Fluorescence Intensity Manager Functional principle About Fluorescence MicroscopyLeica M Series Filter system Rapid Filter Changers and Filter Types Simple filter holders Simple filter holdersLonger than 15 seconds Without fluorescence Removing the simple filter holder Equipping the Filter ChangerInserting the filter Slot for filter slide Tion Observation without FluorescenceObservation without Fluorescence Double Iris Aperture Commissioning the Fluorescence System Burner, you must adjust the arc lamp immeFor observation with fluorescence light Manual M2-216-1 Accessories Leica SmartMove Upper part of the knob = focus Leica SmartTouch Connection Leica PSC ControllerPassing over the specimen quickly Fine control of the mechanical stage Dimensional Drawings Leica M165 FC Leica M165 FC contd Leica M-series 131 Leica M205 FA Leica M205 FA contd Leica M-series 134 Leica M-series 135 Leica M-series 136 Mats TL Specifications Leica M165 FC Leica M205 FA Optical data Leica M165 FC / Leica M205 FA Encoded/automated M205 FA Leica M165 FC / Leica M205 FA cont’dFIM, filter Engageable zoom notches For repetitive tasks Additional objectives non-parfocal Column, with power supply Computer interfaceTransmitted light stands With Rottermann Contrast and Ccic Leica M Stereomicroscopes The Modular System, M1-105-4en Misc. accessories Leica EL6000 Specifications Leica EL6000 Specifications contd Illumination types Leica TL ST Transmitted-light BaseInternal shutter/lamp control Integrated filter holder Yes Internal shutter/lamp control Yes Integrated filter holder Leica TL Bfdf Transmitted-light BaseConcave mirror *** With external light source Leica TL RC / TL RCI Active f=10mm, end tube f=13mm WeightLeica TL RC Leica TL RCI Concave mirror ****With external light source Compatibility Leica IsoPro Motorized XY StageControl options Appendix Example ParameterCalculation example Magnification in the binocular tube Warranty benefits Care, Maintenance, Contact PersonsContact address Care Mail contact Cleaning polymer components Care, Maintenance, Contact Persons contdProtection from dirt Permitted measures