Leica M205 FA user manual IsoPro Manual Mechanical Stage Assembly, Leica IsoPro Mechanical Stage

IsoPro™ Manual Mechanical Stage: Assembly

Leica IsoPro™ Mechanical Stage

Before the Leica IsoPro™ mechanical stage is mounted to the base, the axis containing the control buttons is attached either on the left or the right side of the mechanical stage.

If the controls are to be mounted on the left- hand side, the gear rod on the bottom side of the mechanical stage must be unscrewed and reattached in reverse.

1.Take the glass plate from the mechanical stage.

2.Turn the mechanical stage around and place it onto a non-slip surface.

3.Change the gear rod from the left to the right-hand side.

4.Skip the next two steps to install the controls.

Before the Leica IsoPro™ mechanical stage is mounted to the base, the axis containing the control buttons is attached either on the left or the right side of the mechanical stage.

Left or right operation

If the controls are to be mounted on the left- hand side, the gear rod on the bottom side of the mechanical stage must be unscrewed and reattached in reverse.

Leica M-series User Manual 41