JVC LYT1393-001A manual Digital Dubbing, Equipped With a DV Connector

			EDITING EN 53
To use this camcorder as a recorder			Dubbing To Or From A Video Unit
1 Following the illustrations, connect the
			Equipped With A DV Connector
camcorder and the VCR’s output connectors.
2 Set “REC MODE” to “SP” or “LP”. ( pg. 38)			(Digital Dubbing)
3 Set the camcorder’s Power Switch to “PLAY”.			It is also possible to copy recorded scenes from
4 Set “S/AV INPUT” to “ON”. ( pg. 37, 42)
			the camcorder onto another video unit equipped
5 Press the Recording Start/Stop Button to			with a DV connector. Since a digital signal is
engage the Record-Pause mode.			sent, there is little if any image or sound
● The “ A/V IN ” or “ S IN ” indication appears on			deterioration.
the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The	indication rotates.
8 Press the Recording Start/Stop Button again
to stop dubbing. The		indication stops
rotating.
9 Press 8 to return to the normal playback			To DV IN/OUT
mode.

NOTES:

● After dubbing, set “S/AV INPUT” back to “OFF”. ● Analogue signals can be converted to digital

signals with this procedure.

● It is also possible to dub from another camcorder.

DV cable

Core filter (optional)

To DV IN/OUT

Video unit equipped with DV connector

ADVANCED FEATURES

CONTINUED ON NEXT PAGE