JVC LYT1393-001A manual Dubbing To Or From a VCR, EN Editing, To use this camcorder as a player

52 EN EDITING
Dubbing To Or From A VCR	NOTES:
	● Set the video out select switch of the cable
Open the cover.	adapter as required:
	Y/C: When connecting to a TV or VCR which
To S connector	accepts Y/C signals and uses an S-Video cable.
	CVBS: When connecting to a TV or VCR which
	does not accept Y/C signals and uses an audio/
	video cable.
	● The S-Video cable is optional. Be sure to use
To AV connector	the YTU94146A S-Video cable. Consult the
	JVC Service Center described on the sheet
	included in the package for details on its
	availability. Make sure to connect the end with
	a core filter to the camcorder. The core filter
	reduces interference.

S cable			AV cable	To use this camcorder as a player
(optional)			(provided)
				1 Following the illustrations, connect the
				camcorder and the VCR’s input connectors.
1	2	3	4	2 Start playback on the camcorder. ( pg. 22)
				3 At the point you want to start dubbing, start
				recording on the VCR. (Refer to the VCR’s
			Cable	instruction manual.)
				4 To stop dubbing, stop recording on the VCR,
“Y/C”/“CVBS”			Adapter*
Video Out Select				then stop playback on the camcorder.
Switch			TV	NOTES:
To VCR
				● It is recommended to use the AC Adapter as
				the power supply instead of the battery pack.
	VCR			( pg. 15)
				● To choose whether or not the following displays
A To S-VIDEO IN or OUT**				appear on the connected TV
				• Date/time
B Yellow to VIDEO IN or OUT				Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
C Red to AUDIO R IN or OUT				( pg. 37, 42) Or, press DISPLAY on the
D White to AUDIO L IN or OUT				remote control to turn on/off the date indication.
* If your VCR has a SCART connector, use the				• Time code
provided cable adapter. (The provided cable				Set “TIME CODE” to “OFF” or “ON”.
				( pg. 37, 42)
adapter accepts only output signals from this
				• Indications other than date/time and time code
camcorder. To use this camcorder as a recorder,
use a commercially available cable adapter.)				Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
				TV”. ( pg. 37, 42)
** Connect when your TV/VCR has an S-VIDEO
IN/OUT connector. In this case, it is not
necessary to connect the yellow video cable.