24 EN | VIDEO PLAYBACK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Biphonic Playback | ||||||||||
NOTES: |
|
| |||||||||||
|
| ||||||||||||
● It is recommended to use the AC Adapter as |
|
|
|
|
|
|
|
|
|
|
|
| |
the power supply instead of the battery pack. | You can reproduce real | ||||||||||||
( pg. 15) | |||||||||||||
● To monitor the picture and sound from the | acoustic fields on a conventional TV, VCR, or | ||||||||||||
camcorder without inserting a tape or memory | stereo system connected to the camcorder. | ||||||||||||
card, set the camcorder’s Power Switch to “A” or | 1 Shoot a video in Biphonic Recording mode. | ||||||||||||
“M”, then set your TV to the appropriate input | |||||||||||||
mode. | ( pg. 51) | ||||||||||||
● Make sure you adjust the TV sound volume to its | 2 Connect the camcorder to a TV, VCR, or | ||||||||||||
minimum level to avoid a sudden burst of sound | stereo system. ( pg. 23) | ||||||||||||
when the camcorder is turned on. | 3 Perform steps 1 – 3 in “Normal Playback” | ||||||||||||
|
| ||||||||||||
|
| ( pg. 22). | |||||||||||
|
| 4 Press BIPHONIC to change the setting. | |||||||||||
|
| “ |
|
|
| A” or “ |
|
|
| A”*: Biphonic mode is | |||
|
| automatically engaged when the camcorder | |||||||||||
|
| detects footage recorded with the Mic for | |||||||||||
|
| Biphonic while “AUX MIC” is set to “BIPHONIC”. | |||||||||||
|
| “ |
|
|
| ON” or “ |
|
|
| ON”*: Biphonic mode is | |||
|
|
|
|
|
|
| |||||||
|
| engaged. | |||||||||||
|
| No indication: Biphonic mode is disengaged. | |||||||||||
|
| * | “ |
| ” appears when the camcorder detects | ||||||||
|
|
| footage recorded while “AUX MIC” is set to “OFF”. | ||||||||||
NOTES:
● As long as you use the Mic for Biphonic, even if “AUX MIC” is set to “OFF” on Biphonic Recording, you can obtain a Biphonic effect by selecting
“ 
ON” on the playback.
● Make sure that Biphonic mode is disengaged when you use headphones at Biphonic playback to obtain genuine Biphonic effect.
● When you use a microphone other than the Mic for Biphonic during Biphonic Recording, you cannot obtain an expected effect even if “ 
ON” or “ 
ON” is selected on the playback.
5 To start playback, press 4/9.
NOTES:
● Stereo speakers (incorporated in a TV) are required for Biphonic playback.
● Biphonic effect is maximized in the following cases:
• When you enjoy the video on a big screen TV.
• When the distance between the left and right speakers is sufficient.
• When you position at
front center of both speakers.
