Parts and their functions
Front panel switches
ZOOM ZOOM/FOCUS
REVERSE EXCHANGE
NOR | REV | OFF | ON |
|
|
|
|
ZOOM REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the lens zoom operation which is to be performed by operating the ZOOM lever.
When it is set to NOR, the zoom moves toward the telephoto end when the ZOOM lever is tilted toward TELE or it moves toward the
When it is set to REV, the zoom operates in the reverse directions.
ZOOM/FOCUS EXCHANGE [ON/OFF] switch (Setting at shipment: OFF)
This is used to select the ZOOM lever and FOCUS lever functions. When it is set to OFF, the ZOOM lever adjusts the zoom operation of the lens, and the FOCUS lever adjusts its focus operation.
When it is set to ON, the ZOOM lever adjusts the focus operation of the lens, and the FOCUS lever adjusts its zoom operation.
FOCUS REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the lens focus operation which is to be performed by operating the FOCUS lever.
When it is set to NOR, the point at which the lens is focused moves further away when the FOCUS lever is tilted toward FAR, and it comes closer when the lever is tilted toward NEAR.
When it is set to REV, focusing operates in the reverse directions.
FOCUS | TILT | PAN | |||
REVERSE | REVERSE | REVERSE | |||
|
|
|
|
| |
NOR | REV | NOR | REV | NOR | REV |
|
|
|
|
|
|
TILT REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the operation of the pan/tilt head system in the vertical direction (tilting) which is to be performed by operating the PAN/TILT lever.
When it is set to NOR, the pan/tilt head system moves upward when the PAN/TILT lever is tilted toward UP, and it moves downward when the lever is tilted toward DOWN. When it is set to REV, the tilting operates in the reverse directions.
Normally, set this switch to REV when using the
When the switch is set to REV, the pan/tilt head system moves upward when the PAN/TILT lever is tilted toward UP, and it moves downward when the lever is tilted toward DOWN.
PAN REVERSE [NOR/REV] switch (Setting at shipment: NOR)
This is used to select the operation of the pan/tilt head system in the horizontal direction (panning) which is to be performed by operating the PAN/TILT lever.
When it is set to NOR, the pan/tilt head system moves toward the left when the PAN/TILT lever is tilted toward LEFT, and it moves toward the right when the lever is tilted toward RIGHT. When it is set to REV, the panning operates in the reverse directions.
Normally, set this switch to REV when using the
When the switch is set to REV, the pan/tilt head system moves toward the left when the PAN/TILT lever is tilted toward LEFT and it moves toward the right when the lever is tilted toward RIGHT.
11
