Panasonic AW-RP555N manual Parts and their functions, AWC button, ABC button, TALLY lamps 1 to

Parts and their functions

			GAIN	AUTO	WHT BAL
OPERATE				MANU	A
				0dB
				L
		CAM	MODE	H	B
ON				BAR
		CONT		CAM
		ON	SHUTTER		ATW
OFF
		OFF
		TALLY
	2	3	4	5	1
		CONTROL
1	2	3	4	5
LEVEL	IRIS		MEMORY		6
			AUTO
			MANU

	Multi Hybrid Control Panel AW-RP555
AWC	SCENE FILE
	USER
NG	1
OK	MENU

ABC		2	MENU ITEM		YES	NO
		3
	PRESET			DEF	WIP	H/F
2	3	4	5

(AF)

EXT ND OP

7 8 9 10

LAMP

SPEED		ZOOM
LOW	TELE
HIGH
	WIDE

FAR

NEAR

FOCUSPAN/TILT

UP

LEFTRIGHT

DOWN

AWC button

When the WHITE BAL [A] button or [B] button has been selected, press the AWC button to automatically adjust the white balance and enter the adjustment in the camera’s memory A or memory B.

While the white balance is being adjusted, the AWC button’s lamp flashes; when it has been adjusted properly, it goes off. It comes on when it was not possible to perform the adjustment.

This function does not work if the MODE button has been set to BAR (the MODE button’s lamp is lighted) or if ATW has been selected.

It may not be possible to adjust the white balance if there is no white object on the screen being shot.

When using a pan/tilt head other than the AW-PH350, AW-PH360 or AW-PH650, the button’s lamp also goes off when the white balance has not been adjusted properly.

ABC button

This is used to automatically adjust camera’s black balance in the pan/tilt head system currently selected. Set the IRIS [AUTO/MANU] button to AUTO (the IRIS button is now lighted), and press the ABC button. While the black balance is being adjusted, the ABC button’s lamp flashes; when it has been adjusted properly, it goes off. It comes on when it was not possible to perform the adjustment.

No operations are performed when the MODE button has been set to BAR (the MODE button’s lamp is lighted).

When using a pan/tilt head other than the AW-PH350, AW-PH360 or AW-PH650, the button’s lamp also goes off when the black balance has not been adjusted properly.

SCENE FILE [USER/1/2/3] buttons

These are used to select the SCENE FILE of the camera in the pan/tilt head system currently selected.

The lamp of the selected SCENE FILE button lights.

[In the case of the AW-E350, AW-E650, AW-E655, AW-E750 and AW-E860]

When the [USER] button’s lamp lights, the user mode is selected.

When the [1] lamp lights, the halogen mode is selected. When the [2] lamp lights, the fluorescent light mode is selected.

When the [3] lamp lights, the outdoor mode is selected.

MENU/, ITEM/, YES/, NO/ buttons

These are used to display the on-screen menus of the camera in the pan/tilt head system currently selected so

that the settings can be performed on the menus.

When the MENU/ button is pressed for at least two seconds, the menu mode is established, the on-screen

menus are displayed in the camera video output, and the

MENU/ button lamp lights.

If the MENU/ button is pressed for at least two seconds in the menu mode, the menu mode is exited, the

on-screen menus in the camera video output are cleared,

and the MENU/ button lamp goes off.

For more details, refer to the “Setting and changing the camera menu items” (page 25).

TALLY lamps [1] to [5]

When tally signals are input to TALLY connectors [1] through [5], the lamps with the numbers corresponding to the connectors come on.

7