Panasonic AW-RP555N Connections, RS-232C/RS-422converter, Pan/tilt head, To RS-232Cconnector

Connections

When using the AW-PH300, AW-PH300A, AW-PH500 or the AW-PH600 pan/tilt head

The control signal from this unit must be converted from RS-422 to RS-232C.

Consult with your dealer concerning the RS-232C/RS-422 converter and connecting cable.

Shown below is an example of the connections performed by the RS-232C/RS-422 converter.

TALLY5
TALLY3
TALLY1
TALLY2		DC12V IN
TALLY4
TALLY IN TALLY GND		GND
	TO PAN/TILT HEAD	MONITOR SELECT

RS

REMOTE/SERVICE 5 4 3 2 1/EXT

Pan/tilt head:
	RS-232C/RS-422 converter
To RS-232C connector
Cable length:	RS-232C side	RS-422 side
Less than 32.8 feet (10 meters)

The RS-232C cable AW-CA28T9 may be used for the pan/tilt head AW-PH300 or AW-PH300A.

Cable length:

Less than 2,624 feet (800 meters)

RS-232C/RS-422 converter

Rear connector panel:

modular connector 8-pin plug

D-Sub (9-pin) male

16