Parts and their functions
Control panel
|
|
| GAIN | AUTO | WHT BAL |
OPERATE |
| MANU | A | ||
|
|
|
| 0dB |
|
|
|
|
| L |
|
|
| CAM | MODE | H | B |
ON |
|
| BAR |
| |
|
| CONT |
| CAM |
|
|
| ON | SHUTTER |
| ATW |
OFF |
|
|
|
|
|
|
| OFF |
|
|
|
|
| TALLY |
|
| |
| 2 | 3 | 4 | 5 | 1 |
|
|
|
|
| |
|
| CONTROL |
|
| |
1 | 2 | 3 | 4 | 5 |
|
LEVEL | IRIS | MEMORY | 6 | ||
| |||||
|
|
|
| ||
|
|
| AUTO |
|
|
|
|
| MANU |
|
|
Multi Hybrid Control Panel
AWC | SCENE FILE |
|
|
|
| ||
|
|
|
|
|
| ||
|
| USER |
|
|
|
| |
NG |
| 1 |
|
|
|
| |
|
|
|
|
|
| ||
OK |
|
|
| MENU |
|
| |
|
| 2 |
|
|
| ||
ABC |
| MENU ITEM | YES | NO | |||
|
| ||||||
|
| 3 |
|
|
|
| |
| PRESET |
|
| DEF | WIP | H/F | |
2 | 3 | 4 | 5 | ||||
|
|
| |||||
(AF)
EXT ND OP
7 8 9 10
LAMP
SPEED | ZOOM | |
LOW | TELE |
|
HIGH |
|
|
| WIDE |
|
FAR
NEAR
FOCUSPAN/TILT
UP
LEFTRIGHT
DOWN
OPERATE lamp
This lamp will come on when power is supplied to this unit and the OPERATE switch is on.
OPERATE switch
This controls the power of all pan/tilt head systems (pan/ tilt head and convertible camera) connected to this unit. Allow at least 5 seconds between ON/OFF operations.
Setting the OPERATE switch to OFF will not turn the power to this unit off. To turn the power to this unit completely off, the power switch of AC adapter must be turned off.
GAIN [AUTO/MANU] button
This is used to select the gain control mode of the camera in the pan/tilt head system currently selected. Each time it is pressed, the mode is switched by one step in the sequence of the auto mode and manual mode
[0 dB, L (9 dB) and H (18 dB)].
If a setting other than 0 dB, 9 dB or 18 dB has been selected for the gain in the manual mode using the camera menu, it will be changed to the setting established by the operation of this button.
In the auto mode, the button’s lamp lights; in the manual mode, it goes off.
CAM CONT lamp
This lights when the CAM CONT switch is at ON and communication with the camera of the pan/tilt head system currently selected is taking place successfully. It goes off if trouble occurs in the communication.
When using a pan/tilt head other than the
MANU [L, H] lamp
These lamps turn on and off as follows when a MANU gain setting has been selected using the GAIN button.
0 dB | L lamp off | H lamp off |
9 dB | L lamp on | H lamp off |
18 dB | L lamp off | H lamp on |
When a setting other than the above has been selected using the camera menu, both the L and H lamps turn on.
CAM CONT switch
This switch is used to turn the control panel’s camera control functions ON or OFF.
ON: Camera control is enabled (turned on).
OFF: Camera control is disabled (turned off).
The following functions can be turned on and off using the CAM CONT switch.
GAIN, MODE, SHUTTER, WHT BAL [A, B, ATW], AWC, ABC, SCENE FILE [USER, 1, 2, 3], MENU/
, ITEM/
, YES/![GAIN [AUTO/MANU] button](/images/new-backgrounds/11165/111659xi4.webp){kind=small}
, NO/
MODE [BAR/CAM] button
This is used to select the camera’s video output signals in the pan/tilt head system currently selected.
Each time it is pressed, the camera’s color bar signals or video signals are selected in turn.
When the color bar signals are selected, the button’s lamp comes on; when the video signals are selected, it goes off.
5
